Mechanical Technician Overhaul Technician Rolling Stock Heavy Technician Looking for a new role? Dont want to work Nights? We are looking for an experienced MechanicalTechnicians to carry out Heavy maintenance on a fleet of vehicles in Derby on a 18 month Contract basis. This role has a rate of 19.59 ph PAYE or 26.59 Umb - 40 hours a week, Monday to Friday Days only with potential overtime The individuals must have experience in some form of Maintenance or overhaul of Rolling stock or Heavy equipment/Vehicles such as Diggers, Plant, Tractors, HGVs, Armoured/Tracked vehicles etc Your Tasks Carry out maintenance and overhaul of Rail Vehicles to laid down standards and procedures Working on the underframes of rail vehicles to refit/replace components as part of the overhaul. Your Profile Essential: Experienced engineer, qualified to NVQ Level 3. Proven experience of either involvement and understanding of rail vehicle heavy maintenance activities such as...

Job Title: Mechanical Fitter (Raft Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: 17- 18.79 plus shift allowance. Late shift: Monday - Thursday 14.30pm to 01.00am ( after completing 4 weeks training on days 7am till 4pm Monday to Thursday and 7am till 1pm on a Friday) Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters for an ongoing contract. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters with Hydraulic experience Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. To be able to fault find and carry out diagnostic investigation work. Previous engine knowledge would be advantageous. To overhaul of raft components. To be able to understand schematic drawings. To undertake training as and when required. To...

TXM Recruit are looking for a Semi Skilled Paint Sprayer on an initial contract basis to work for an engineering company in Doncaster then move to Burton. The standard rate for this role is 22.39ph Umb/ 16.50 PAYE (inside IR35) with overtime enhancements after 37 hrs. The role is expected to be Monday to Friday days predominantly with some Afternoons (paid at a 20% uplift), 37 hours per week with occasional overtime. This will be a 9/10 month training at Doncaster with Mileage paid for travel to this depot (30p per mile) , the role will then move to a new facility being built in Barton under Needwood (Burton upon Trent, DE13 area) where there will be the opportunity to go permanent after a short while. Position Summary: To carry out Painting duties and some semi skilled fitting work on Rolling Stock related components Person Profile/Experience: Practical painting experience in industrial industries, Shotblasters may be considered No qualifications are required...

The Basics: Role: CNC Machinist - Both CNC Millers and CNC Turners considered Position: Permanent Location: Pinxton Shifts choice available: Days only: Mon-Thurs (7.30am - 4.30pm) and Fridays (7.30am - 12.30pm) OR Days & Nights rotating: Mon-Thurs (7.30am - 4.30pm) and Fridays (7.30am - 12.30pm) rotating every 2 weeks with Mon-Wed (8.30pm - 7.00am) and Thurs (8.30pm - 6.00am) Contracted hours per week: 39hrs Pay rates are dependent on experience: Up to 21.16 per hour for days and up to 28.14 per hour for nights Overtime: Paid at x1.5 Holidays/Benefits: 33 days, 13 weeks company sick pay, 4% pension contribution. Overview: Working in modern, purpose-built manufacturing facilities we now require CNC Machinists to join the team. The ideal candidate / CNC Machinist may have some of the following, however, please note these are only desirable and not essential as all applications will be looked at individually: Time served engineering apprenticeship...

CNC Miller Nottingham Up to 17.00ph Day Shifts Permanent Position CNC Milling Machinists requited immediately for our precision engineering client based in Nottingham. The role will involve either programming or setting and operating a variety of CNC Milling machinery. Duties: Programming or setting and operating milling machines (online) Using different control systems including Fanuc, Siemens and Heidenheim Maintaining high quality standards such as ISO 9001 Reading and interpreting technical drawings and job cards Producing bespoke components that are made to order Selecting appropriate tooling and fixtures for specific jobs Person Specification: CNC Milling experience is essential Programming experience would be preferred, however strong setting and operating experience would be accepted Worked with a wide variety of materials including aluminium, stainless steel and mild steel Ability to work from technical drawings and use...

Quality Inspector Nottingham Up to 18.00ph Permanent, Full-Time Day Shift We are proud to be partnering with a well-established engineering company renowned for its commitment to quality and safety. Our client is seeking a highly capable and motivated Quality Inspector to support their operations. Your Key Responsibilities: Performing inspections at every stage of production, ensuring compliance with ISO:9001 and customer requirements Inspecting parts and assemblies using CMM machines Conducting internal audits, COSHH assessments, and coordinating external evaluations Taking ownership of quality documentation and completing all necessary records Supporting the production team with complains and any issues that arise Maintaining calibration systems and overseeing non-conformance handling The Ideal Candidate Will Have: Strong background within a Quality Inspector role Proficiency in interpreting mechanical drawings and using a wide...

Job Title : Profiler Location : Nottingham Pay : 21.00 per hour Hours : Saturday & Sunday nights (weekend nights only) Gi Pro are working with a well-established steel fabrication business in Nottingham who are looking to add an experienced Profiler to their weekend night shift. Key Responsibilities: Operate profiling machinery (e.g. plasma/Oxy-fuel) to cut steel plate to specification Interpret engineering drawings, cutting lists and work instructions Set up, calibrate and adjust machines to achieve accurate cuts and high-quality finishes Carry out basic maintenance and pre-use checks on machinery Monitor production quality and make adjustments to optimise output and minimise waste Work closely with production, welding and fabrication teams to meet schedules Complete all relevant paperwork and data entry as required Adhere to all health & safety, quality and housekeeping standards Requirements: Proven experience as a Profiler / Profiling Machine...

Fabricator / Welder Nottingham 13.00 - 23.00ph Immediate Start Day & Night Shift Available! We are seeking multiple Fabricator Welders to join our well established manufacturing client in Nottingham. You'll be instrumental in the fabrication and welding of bespoke metal components, contributing to high-quality engineering projects across a range of sectors. Key Responsibilities: Fabricate metal structures and components from scratch Using MIG welding techniques on gauges up to 100mm Read and interpret complex engineering drawings and technical specifications Operate fabrication equipment such as guillotines, press brakes, rollers, and grinders Measure, cut, and assemble steel and other metals to exact tolerances Inspect finished products for quality assurance and compliance with specifications Qualifications & Experience: Proven experience in fabricating and welding within an engineering or manufacturing environment Welding certificates or...

Mechanical Fitters (2-3 Positions) Location: Derby Salary: 13.00 - 17.00 per hour + Overtime Hours: 42 hours per week (Mon-Fri, 07:30-16:30) Overtime: Time and a half after 39 hours We are currently recruiting for multiple Mechanical Fitters on behalf of a well-established engineering business operating within the rail sector. Due to continued growth and increased workload, our client is looking to expand their skilled team. The Role This is a hands-on position working on a range of mechanical systems and components, primarily within the rail industry. The role will involve both workshop and occasional site-based work. Key responsibilities include: Installation, assembly, and alignment of mechanical components and equipment Maintenance and repair of railway-related systems, including damaged rolling stock Diagnosing faults and carrying out corrective work Working with pumps, gearboxes, conveyors, valves, and rotating equipment Reading...

Job Title: Yard Operative / Shunter (Rail) Location: Charnwood / Loughborough Area Salary: £18.00 PAYE / £23.49 Umbrella per hour (Days) £23.94 PAYE per hour / £31.17 Umbrella (Nights) 57.5 hour working week on average. Circa £55-60kpa (shift dependant). Role Type: 3-Month Rolling Contract; Monday Friday (Days / Nights) Are you a hard-working, hands-on individual looking for a physically active role in a fast-paced industrial environment? This is a great opportunity to join a large-scale operation within the Rail sector, supporting yard logistics and site movements. We re looking for Yard Operatives / Shunters to join a busy site in the East Midlands. The ideal candidate will have some rail experience or familiarity working in a similar safety critical environment. It s an excellent opportunity for individuals from track side labouring, yard operative, depot shunting or similar backgrounds. We would also welcome applicants transitioning from other highly...

Job Title: Yard Operative / Shunter Location: Loughborough Area Salary: £18.00 PAYE / £23.49 Umbrella per hour (Days) £23.94 PAYE per hour / £31.17 Umbrella (Nights) Role Type: 3-Month Rolling Contract; Monday Friday (Days or Nights) Are you a hard-working, hands-on individual looking for a physically active role in a fast-paced industrial environment? This is a great opportunity to join a large-scale operation within the Rail sector, supporting essential logistics and site movements. We re looking for multiple Yard Operatives / Shunters to join a busy site in the Loughborough area. The perfect opportunity for Rail accustomed candidates, this role offers consistent hours, strong pay rates and the chance to be part of a key operational team. The Role and About You: You ll be working as part of a team responsible for the safe and efficient movement of Railway Wagons and Engines across a large industrial site. This is a physically demanding role where you ll be on...

MIG Welder Fabricator Location: Nottingham NG17 Job Type: Full-time, Permanent Start Date: Immediate Start Available Pay Rates: 15.50-18.00 depending on experience About the Role Barker Ross are currently looking for experienced MIG Welder Fabricators to join our outstanding clients growing team. We have 2 positions available within our modern workshop environment, offering excellent working conditions and long-term opportunities for the right candidates. What We Offer Competitive pay rates Modern workshop with state-of-the-art equipment Friendly and supportive team environment Opportunities for career progression and skills development Stable, full-time hours Working Hours 42-hour standard working week Monday to Thursday: 6:30am - 4:00pm Friday: 6:30am - 12:30pm Key Responsibilities MIG welding and fabrication of metal structures and components Reading and interpreting engineering drawings Ensuring high-quality workmanship...

MIG Welder Got the steady hand and sharp eye of a MIG welder? If precision is your thing and you take pride in clean, consistent welds, this is a great opportunity to join a well established Leicester based sheet metal manufacturer with a strong order book and genuine long term scope. Experience MIG welding aluminium would be a big advantage, particularly for this role. Job Title: MIG Welder Location: East Goscote, Leicester Pay: Starting at £16 per hour - willing to increase for the right candidate, depending on experience Shift: Mon - Weds, 2pm - midnight Thurs, 2pm - 11:30pm You'll be getting stuck into: Precision MIG welding of sheet metal components Working from engineering drawings and welding to specification Producing neat, high quality welds to a clean finish Visual inspection and minor finishing where required Keeping your work area safe, organised, and production ready Supporting the wider fabrication team as needed You'll need to bring:...

CNC MACHINISTS WANTED - LEICESTERSHIRE Location : Leicester, Loughborough, Hinckley, Coalville, Melton Mowbray & surrounding areas Salary : 14 - 20 per hour (DOE + Overtime) Job Type: Full-time Permanent & Long-Term Contract Roles Shifts : Days, Nights, Double Days and Weekend Rotas Available GI Pro is supporting a number of leading precision engineering and manufacturing companies across Leicestershire who are expanding their CNC teams. We are now looking to speak to skilled CNC Machinists for immediate and upcoming roles with competitive rates and permanent opportunities available. We're hiring for the following roles: CNC Millers (Setter/Operators & Programmers) CNC Turners (Setter/Operators & Programmers) Manual Machinists with CNC experience Multi-axis Machinists (4 & 5 Axis) Experience with the following controls is desirable: Fanuc Heidenhain Siemens Mazatrol Hurco What's on offer? Competitive hourly rates...

WELDERS WANTED - MULTIPLE ROLES ACROSS LEICESTERSHIRE Location : Leicestershire (Leicester, Loughborough, Hinckley, Melton Mowbray & surrounding areas) Salary : 13 - 18 per hour (depending on experience & shift patterns) Job Type : Full-time, Permanent & Contract Opportunities Shift Patterns : Days, Nights and Rotating Shifts Available GI Pro is proud to be working in partnership with a number of respected and growing engineering and manufacturing businesses across Leicestershire. Due to continued growth and high demand, we are now recruiting skilled Welders for several long-term opportunities with immediate starts available. We are looking for candidates with experience in: MIG Welding TIG Welding Fabrication Working from technical drawings Welding on mild steel, stainless steel or aluminium Structural and/or bespoke work What's on offer? Competitive hourly rates with regular overtime Stable, ongoing work with potential for...

Engine Builder £17 per hour PAYE rising to £18.20 PAYE from week 13 onwards Monday - Thursday 7am - 4pm. Friday 7am - 1pm Overtime available 6 Month Contract Minimum (with potential for extension or permanency) The Role Step into a state of the art, purpose built engineering facility and be part of something exceptional. We re recruiting skilled Engine Builders to join a cutting-edge rail operation in Burton-on-Trent , where innovation meets precision. This is more than just a contract it s an opportunity to work in a modern, high-spec environment , contributing to the build and rebuild of world-class diesel engines that keep the rail industry moving. If you take pride in precision engineering and want to work in a facility designed for excellence, this role is built for you. Why This Opportunity Stands Out Work in a brand-new, purpose-built facility with cutting-edge equipment Be part of a high-performing engineering team delivering critical rail...

Support customers, solve problems, and deliver high-quality service in a hands-on technical support contract role. Our Client has a requirement for a 1st Line Customer Support Representative , who will be required to work on a contract until December 2026 basis in Stafford . Role Purpose: Reporting to the UK Service Leader, the Technical Support Specialist will be a key member of the operations team The successful candidate will provide customer support, take end-to-end ownership of the RMA (Return Material Authorisation) process, and respond to customer queries relating to installed protection and control systems This role requires working within defined parameters to make decisions, apply technical concepts to moderately complex issues, and resolve problems through immediate action or short-term planning Job Role Responsibilities : Review, analyse, and resolve assigned customer application enquiries in line with business standards, procedures, and...

Test Cell Engineer Location: Barton under Needwood Pay Rate: £17.00 per hour (PAYE), increasing to £18.79 per hour (PAYE) after 12 weeks Job Overview We are currently recruiting a Test Cell Engineer to support the testing and validation of rail-based power products, including diesel engines, transmissions, powerpacks, and cooler groups. This is a hands-on role suited to someone with a strong mechanical and electrical background and an interest in rail engineering. You will work within a production testing environment, using computer-controlled test cells to ensure products meet all required specifications and quality standards. Key Responsibilities Installation, setup, and testing of production power products within test cells, following detailed work instructions Ensure all products fully meet defined testing requirements Accurately record test data to ensure full traceability Assist with developing testing requirements for future products Diagnose and...

A Fabricator / Welder / Fitter is required to join a leading engineering company based in the Aldridge area, on a temp to perm basis. This is an excellent opportunity to join a growing and innovative business that is investing heavily in both equipment and employee development. For this role you will need previous fabrication, welding and fitting experience, along with the ability to work from fully detailed engineering drawings. Duties include; Fabrication and welding of bespoke container conversions and similar Working from detailed engineering drawings Fitting and assembly work on completed projects Supporting projects from initial build through to completion Working as part of a skilled and experienced engineering team General fitting skills would be a distinct advantage for this position. This is a varied and hands-on role where no two projects are the same. Training, shadowing and ongoing support will be provided to help you develop within the position. This...

Position: Panel Wirer Salary: 20.00 - 22.00 - Negotiable Location: Walsall Hours: Monday to Thursday 07:00am - 17:30pm - 40+ hours per week - OT Available (Early start available) Proactive are currently recruiting for multiple experienced Panel Wirers to begin work for a leading engineering company based in Walsall. The correct candidate ideally should be multi skilled capable and adaptable, be self-organised and personable, with an eye for detail and good initiative. Principle Duties include: Control Panel Build and Panel Wiring Control panel & equipment build, cable installation & containment, wiring of sensors. Fitting / Assembly Including completion of build records. Abilty to read electrical wiring diagrams and schematics. Experience and qualifications required: Good standard of education Experienced with hand tools and power tools. Working to CAD electrical drawings, following BOM's. Adhering to strict quality standards. IT...