NRL is looking for Valve technicians for an Offshore trip, full JD can be sent on application Candidates MUST have good proven previous experience working as a Valve Technician Mob Date: Approx 03/10/26 Mob from: Aberrdeen Duration: Up to 3 week trip Inspection, Diagnostics and Fault-Finding Inspect hydraulic systems and components for wear, damage, leakage and performance issues. Diagnose hydraulic and electrical faults using appropriate testing equipment. Verify pilot pressures, solenoid operation, coil resistance and electrical signals. Interpret hydraulic schematics, engineering drawings and Piping and Instrumentation Diagrams (P&IDs) to identify faults and determine repair requirements. Maintenance and Repair Strip, inspect, clean and rebuild hydraulic pilot valves, solenoid valves, actuators and associated components. Replace seals, O-rings, springs and worn internal parts in accordance with manufacturer specifications. Carry out preventative maintenance...

DT Technician Fantastic opportunity to work in a top London school ASAP start DT Technician Key Stages 3 and 4 Full time position Salary 130 - 180 per day Interviews over the next couple of weeks JOB DESCRIPTION DT Technician required for a high-achieving school in west London. The school are looking for a DT Technician to come in a support a fantastic DT Department. The school are looking for a DT Technician to join them ASAP the role will be offered on a full-time basis. The school are happy to consider experienced DT technician's or candidates who are looking to start out in their first post from a DT background as training can be provided. The school are keen to look over DT Technician CVs ASAP and meet DT technician's for a paid trial or an interview over the next couple of weeks. SCHOOL INFORMATION The school has a tradition of combining both high expectations for all their students and a curriculum that is appropriate to the needs of the 21st...

R&D Advanced Power Systems Technician Location: Peterborough Pay Rate: 20.00 per hour Employment Type: 12-Month Contract (Fully Onsite) Working Hours: 37 hours per week (Day Shift) Role Overview We are seeking a hands-on R&D Technician to join an advanced powertrain division. In this role, you will work on cutting-edge projects including electric motor testing, hybrid powertrain development, and transmission development programmes. You will support build, strip, rebuild, and testing activities across a range of emerging technologies. Key Responsibilities Conduct hands-on mechanical and electrical build, strip, rebuild, diagnostic, and repair activities on prototype power systems. Run test bed software, carry out test plans, and support data logging/analysis under the guidance of lead engineers. Perform electrical safety and insulation checks using diagnostic and service tools. Identify, report, and help resolve technical or product quality...

Manufacturing Technician I Location: Loughborough (Bishop Meadow Road) - fully onsite Pay Rate: 13.20 per hour (Equivalent to 24,258 per year) Contract Type: 12-Month Contract, Full-Time Hours: 37.5 hours per week, Monday to Friday (08:00 - 16:00) We are looking for practical, motivated team players to join our onsite manufacturing team in Loughborough. In this entry-level role, you will start by packing chemical containers and outer packaging. As you gain experience and complete your training, you will progress to filling chemicals and operating machinery. This is an active, hands-on position with a structured 12-month training plan designed to help you step up into a Manufacturing Technician II role. Key Responsibilities Packing & Assembly: Pack various chemical products into different container styles and outer packaging according to daily schedules and work orders. Equipment Operation: Use manual and automatic packaging equipment,...

Technician - Electrically Biased Location: Long Marston Start Date: ASAP Duration: 6 months initially Location: Long Marston, CV37 Rate of Pay: 21.22 per hour PAYE (standard + 15% shift) or 27.07 per hour (Pre 12 weeks - Umbrella), increasing to 28.52 after 12 weeks (Post 12 weeks - Umbrella) Shift Pattern: Days, Monday to Friday - 8am to 4pm (Overtime can be discussed and is offered on an as required basis, this is paid at Standard Rate) Join Our leading Rail Client's Team and Help Keep Britain Moving! Are you a hands-on, detail-oriented Technician from auto, aerospace or rail industries with a passion for electrical-mechanical engineering? Do you want to work in a dynamic environment where your skills keep vital rolling stock in top condition? If so, we want to hear from you! Training & Courses You Will Achieve Prior to Start (must be available to complete the below mandatory and fully paid training) Training will be facilitated in Northampton...

Astute's Power Team are currently recruiting a C&I Commissioning Technicians to join the EPC Contractors commissioning team for their Waste to Energy facility based in Scotland on an initial 12 months contract basis. The C&I Commissioning Technician positions come with a day rate from 400.00 to 450.00 outside of IR35. Role responsibilities and key skills for the role: Carry out pre-commissioning and commissioning of field instrumentation, including transmitters, switches, analysers, control valves and actuators. Perform inspections, calibration verification, loop checks, functional testing and I/O verification across DCS, PLC and SCADA systems. Complete commissioning documentation and check sheets, recording test results, calibration data, punch items and deficiencies in real time. Conduct system walkdowns, mechanical completion inspections and punch-list close-out, updating P&IDs, loop diagrams and other drawings where required. Coordinate with commissioning...

Science Technician Secondary Independent School Located in Harrow ASAP/ October 2026 95 to 105 per day (Term time only/ Full time) Veritas Education are currently working alongside an independent secondary school who are looking for a Science technician within their science department. The school caters for children of high academic standards who you will be supporting during practicals and occasionally class sessions. Your duties will include working as a team with other technicians to prepare materials and equipment for science lessons, carrying out risk assessments, keep check of stock and disposing of waste appropriately. Alongside the technician role you will also be expected to support students within the classes - especially during practical sessions. The school has a supportive team of staff which will assist you during your progress within the role. This mainstream secondary school also have new facilities in all departments. Requirements:...

Multi-Skilled Maintenance Technician Location: Peterborough, UK Contract Duration: 12 Months Hours: 37 hours per week (9-day fortnight pattern) Pay Rate: 21.20 - 23.20 per hour About the Role We are seeking an experienced Multi-Skilled Maintenance Technician for a 12-month contract supporting a state-of-the-art engine test facility. In this role, you will provide critical technical support to ensure high-quality data output across world-class performance, emissions, and mechanical validation capabilities. You will be responsible for maintaining, manufacturing, commissioning, and upgrading multi-million-pound test facility support systems and rigs, collaborating closely with multidisciplinary facilities teams, engineering groups, and external contractors. Key Responsibilities Breakdown & Repair: Respond to testbed and facility breakdowns using structured fault-finding and diagnostic techniques. Maintenance & Installation: Conduct planned,...

Paint Sprayer / Vehicle Paint Technician - Rolling Stock Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern Location: Derby Shifts: Days Minimum 45 hours per week Immediate starts available Key Responsibilities Carry out full surface preparation on rolling stock (sanding, keying, masking, filling) Apply primer and topcoat systems, including 2K paint...

Paint Sprayer / Vehicle Paint Technician - Night Shift Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern Location: Derby Shifts: Nights Minimum 48 hours per week Immediate starts available Key Responsibilities Carry out full surface preparation on rolling stock (sanding, keying, masking, filling) Apply primer and topcoat systems, including 2K paint...

Astute's Power Team are currently recruiting a Electrical Commissioning Technicians to join the EPC Contractos commissioning team for their Waste to Energy facility based in Scotland on an initial 12 months contract basis. The Electrical Commissioning Technician positions come with a day rate from 400.00 to 450.00 outside of IR35. Role responsibilities and key skills for the role: Hands-on commissioning of electrical components and systems such as, transformers, medium/low voltage switchgears, DC systems, rectifiers, inverters, motorized valves, instruments etc. Fully competent at using Primary & Secondary Injection test set equipment. Assist the commissioning engineers in carrying out testing on electrical systems and equipment, as well as system optimization and troubleshooting and filling-in the respective commissioning documentation and protocols Participation in the walk-downs for Turnover from construction to commissioning, identifying open items that prevent system...

Our Leicester cient is looking for 2 Technicians - Tape Testing & Metrology, to join them on a 6 month contract, due to an uplift in work. The roles do have the opportunity to go permanent following the initial timescales needed. Job Type: Full-time Department: Manufacturing / Engineering About the Role We are looking for a Technician - Tape Testing & Metrology to join our UK team and play a key role in the day-to-day testing, inspection and traceability of HTS tape materials. This is a hands-on technical role, responsible for operating tape testing and measurement equipment, carrying out incoming inspection of HTS reels, maintaining accurate test and traceability records, and supporting the Tape Insertion Manufacturing Engineer with production activities. The successful candidate will have a practical, methodical approach, strong attention to detail, and a commitment to quality and accurate data. Key Responsibilities Tape Testing & Metrology Operate...

Graduate Science Technician Independent Secondary School Located in Barnet September/ October 2026 Start Veritas Education are currently working alongside an independent secondary school in Barnet who are looking for a science technician within their science department. The school caters for children of high academic standards who you will be supporting during practicals and occasionally class sessions. Your duties will include working as a team with other technicians to prepare materials and equipment for science lessons, carrying out risk assessments, keep check of stock and disposing of waste appropriately. Alongside the technician role you will also be expected to support students within the classes - especially during practical sessions. The school has a supportive team of staff which will assist you during your progress within the role. This mainstream secondary school also have new facilities in all departments. Requirements Science based degree is...

Overhaul Technician Contract Duration: 6 months Location: Eastleigh Shift pattern: 11- and 12-hours days, rotating 4- and 5-day shift patterns. Pay Rates: Umbrella Pay Rate: 26.91 per hour / PAYE Pay Rate: 20.50 per hour Role Overview: You will be undertaking the following overhaul & modification duties on the a Rolling Stock (Rail) Project, working on various bogie fleets whilst adhering to the requisite processes & procedures: Carry out the initial inspection of wheelsets Axle bearing removal taking care to ensure no damage to the axle or components occurs and prepare the bearings for dispatch to the relevant external companies Paint removal on the axle Wheel pan removal taking the relevant precautions to ensure no damage to components is caused Surface defect removal Oil drain and fill on wheelset gearbox and couplings and any associated parts Initial Bogie inspection reporting any findings through the relevant maintenance portal and...

Job title: Lead Technician Job Type: 6 month contract with possible extension Location: Derby Pay rate: 26.92 per hour PAYE or 35.98 per hour Umbrella IR35: Inside Working Hours: 4 on / 4 off (days & nights), overtime available Are you an experienced Electrician Technician ready to step into a lead role with one of the UK's most advanced train fleets? We are seeking a Technician to join a busy maintenance depot in Derby, supporting the servicing, fault finding, repair, and reliability improvement of modern rolling stock. This is an excellent opportunity for a highly skilled electrical technician looking for a long-term contract with strong earning potential. Key Responsibilities Lead complex fault finding, diagnostics, and repairs on rolling stock assets. Support planned and reactive maintenance activities. Identify and rectify electrical defects. Produce technical scopes of work and support reliability improvements. Provide technical support during service failures and...

Laboratory Technician Location: Dartford, UK (Onsite) Contract Type: Full-time, 6-Month Contract Working Hours: Monday - Friday, 08:00 - 16:00 (37.5 hours per week) Pay Rate: 14.14 per hour Role Overview We are seeking a detail-oriented Laboratory Technician to join a growing microbiology manufacturing team. Working within a regulated manufacturing laboratory, you will prepare reagents and intermediates, carry out in-process testing, and ensure all work adheres to quality standards and standard operating procedures. No prior specialized experience is required-full training will be provided by an experienced team, making this an ideal opportunity to build a career in science and manufacturing. Key Responsibilities Manufacture intermediates and final reagents, including performing in-process quality testing. Safely handle microorganisms for use in testing procedures. Maintain high quality standards and accurately complete batch documentation. Monitor...

Job Title: Rolling Stock Technician Ref: CC(phone number removed) Location: Scotland (Various Options) Salary: Circa £35-40/hour (Umbrella) Shift: Days/Nights Options; Continental Shift Pattern; 35-40 hour week Role Type: Rolling Contract (Issued in 3 month blocks) Are you looking to join a team that is striving for more? This is a great opportunity to join a specialist team working to service rolling stock across Scotland. You will be part of a specially trained team that will tackle maintenance and address any faults that have occurred in service. This team and role is all about achieving a more efficient railway - with a focus on the customer you will help their fleets in service deliver safe, reliable services across Scotland & the UK. This is an exciting time to join a rail company that is pushing to improve customer experience through dedicated and detailed train maintenance activities, focusing on key elements of maintainability and improving day to day service...

Manufacturing Technician I Location: Cramlington Position Type: Full-time (12-Month Contract) Shift Pattern: Day shift ( 4 days on and 4 days off) rotation, 6:00 AM - 6:00 PM) Pay Rate: 13.46 per hour + 20% shift allowance Role Overview Safely and efficiently produce single-use medical products within a cGMP-compliant cleanroom environment, working to a defined schedule to meet customer orders. Key Responsibilities Follow detailed Standard Operating Procedures (SOPs), assembly drawings, and batch record sheets. Manually assemble critical components on the production line using manual, electronic, and pneumatic hand tools. Perform raw material setup and kitting. Inspect finished goods to ensure adherence to strict quality and customer specifications. Accurately record cGMP data within batch records. Maintain cleanroom 5S standards, safety practices, and correct PPE usage (including gowning). Requirements & Qualifications Previous...

Vehicle & Equipment Technician (Generator & Power Systems) Company: E-ppl Ltd Location: Banbury Pay Rate: £22.00 per hour Security Clearance: BPSS (Must be eligible to achieve) Contract Type: Contracting Ongoing Location: OX16 4SP About the role E-PPL is a leading provider of engineering, technical, and resource solutions across the automotive, power, and industrial sectors. We are seeking a skilled Vehicle & Equipment Technician specialising in generator repair and ground power support. In this role, you will perform essential preventative maintenance, fault diagnostics, and complex mechanical/electrical repairs on power generation units and heavy equipment to ensure maximum operational reliability for our clients. Key Responsibilities Diagnostics & Repair: Conduct fault identification, servicing, and full overhauls on diesel engines, auxiliary power units (APUs), and stationary or mobile generator systems. Electrical Systems Maintenance:...

Installation Technician - Yorkshire Based UK Wide Travel Location: Yorkshire Based - UK Wide Travel Required Job Type: Contract - Full-Time & Part-Time Opportunities Available Pay: 135 per day + All Expenses Paid Are you looking for a hands-on role with the opportunity to travel across the UK? We are recruiting Installation Technicians based in Yorkshire to support a nationwide installation programme on behalf of a confidential client. This is a fantastic opportunity for practical, reliable individuals who enjoy working independently, travelling and completing hands-on work to a high standard. Full training will be provided , so previous experience in this specific role is not essential. We're looking for both full-time and part-time Installation Technicians , making this a great opportunity whether you're looking for consistent work or flexible days around existing commitments. The Role As an Installation Technician, you will: Travel to customer sites...