Modifications & Defects Technician Location: Barton-under-Needwood, DE13 Industry: Rail / Rolling Stock Shifts: Days & Nights - 40 hours per week Contract: 12 month rolling contract Pay: Pre 12 weeks: 27.41 PAYE 35.09 UMBRELLA Post 12 weeks: 27.41 PAYE 36.81 UMBRELLA Overtime paid at 1.25 The Role Our client is looking for an experienced Modifications & Defects Technician to join their rolling stock engineering operation. You'll be responsible for carrying out fleet modifications, fault diagnosis, defect rectification, inspections, testing and technical upgrades, helping to maintain the safety, reliability and availability of the fleet. Key Responsibilities Carry out planned rolling stock modifications, engineering changes and technical upgrades. Install, remove, replace and commission rolling stock components and systems. Diagnose and rectify mechanical, electrical, pneumatic and control system faults. Investigate defects,...

NRL is looking for Valve technicians for an Offshore trip, full JD can be sent on application Candidates MUST have good proven previous experience working as a Valve Technician Mob Date: Approx 03/10/26 Mob from: Aberrdeen Duration: Up to 3 week trip Inspection, Diagnostics and Fault-Finding Inspect hydraulic systems and components for wear, damage, leakage and performance issues. Diagnose hydraulic and electrical faults using appropriate testing equipment. Verify pilot pressures, solenoid operation, coil resistance and electrical signals. Interpret hydraulic schematics, engineering drawings and Piping and Instrumentation Diagrams (P&IDs) to identify faults and determine repair requirements. Maintenance and Repair Strip, inspect, clean and rebuild hydraulic pilot valves, solenoid valves, actuators and associated components. Replace seals, O-rings, springs and worn internal parts in accordance with manufacturer specifications. Carry out preventative maintenance...

R&D Advanced Power Systems Technician Location: Peterborough Pay Rate: 20.00 per hour Employment Type: 12-Month Contract (Fully Onsite) Working Hours: 37 hours per week (Day Shift) Role Overview We are seeking a hands-on R&D Technician to join an advanced powertrain division. In this role, you will work on cutting-edge projects including electric motor testing, hybrid powertrain development, and transmission development programmes. You will support build, strip, rebuild, and testing activities across a range of emerging technologies. Key Responsibilities Conduct hands-on mechanical and electrical build, strip, rebuild, diagnostic, and repair activities on prototype power systems. Run test bed software, carry out test plans, and support data logging/analysis under the guidance of lead engineers. Perform electrical safety and insulation checks using diagnostic and service tools. Identify, report, and help resolve technical or product quality...

Assembley Technician/Electrical Assembly, Ware, Stanstead Abbotts £13.45 p/hr Hours - Monday-Thursday 8-5. Fridays 8-2. month contract The ideal candidate will be responsible for assembling parts and components to build electro-mechanical products, including servo motors and PCB sub-assemblies. They will assemble components accurately; test completed assemblies and report any faults. This role also involves testing, inspecting, troubleshooting, and repairing any issues that may arise. The successful Assembly Technician must work safely and efficiently using hand tools, power tools, machinery, and other equipment, such as T-bars, Allen keys, and screwdrivers. They must also possess excellent communication and problem-solving skills and ensure that all products meet quality and safety standards. Duties and Responsibilities • Assemble components in accordance with technical drawings and specifications. • Build electro-mechanical products, including servo motors and...

Astute's Power Team are currently recruiting a C&I Commissioning Technicians to join the EPC Contractors commissioning team for their Waste to Energy facility based in Scotland on an initial 12 months contract basis. The C&I Commissioning Technician positions come with a day rate from 400.00 to 450.00 outside of IR35. Role responsibilities and key skills for the role: Carry out pre-commissioning and commissioning of field instrumentation, including transmitters, switches, analysers, control valves and actuators. Perform inspections, calibration verification, loop checks, functional testing and I/O verification across DCS, PLC and SCADA systems. Complete commissioning documentation and check sheets, recording test results, calibration data, punch items and deficiencies in real time. Conduct system walkdowns, mechanical completion inspections and punch-list close-out, updating P&IDs, loop diagrams and other drawings where required. Coordinate with commissioning...

Multi-Skilled Maintenance Technician Location: Peterborough, UK Contract Duration: 12 Months Hours: 37 hours per week (9-day fortnight pattern) Pay Rate: 21.20 - 23.20 per hour About the Role We are seeking an experienced Multi-Skilled Maintenance Technician for a 12-month contract supporting a state-of-the-art engine test facility. In this role, you will provide critical technical support to ensure high-quality data output across world-class performance, emissions, and mechanical validation capabilities. You will be responsible for maintaining, manufacturing, commissioning, and upgrading multi-million-pound test facility support systems and rigs, collaborating closely with multidisciplinary facilities teams, engineering groups, and external contractors. Key Responsibilities Breakdown & Repair: Respond to testbed and facility breakdowns using structured fault-finding and diagnostic techniques. Maintenance & Installation: Conduct planned,...

Paint Sprayer / Vehicle Paint Technician - Rolling Stock Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern Location: Derby Shifts: Days Minimum 45 hours per week Immediate starts available Key Responsibilities Carry out full surface preparation on rolling stock (sanding, keying, masking, filling) Apply primer and topcoat systems, including 2K paint...

Paint Sprayer / Vehicle Paint Technician - Night Shift Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern Location: Derby Shifts: Nights Minimum 48 hours per week Immediate starts available Key Responsibilities Carry out full surface preparation on rolling stock (sanding, keying, masking, filling) Apply primer and topcoat systems, including 2K paint...

Astute's Power Team are currently recruiting a Electrical Commissioning Technicians to join the EPC Contractos commissioning team for their Waste to Energy facility based in Scotland on an initial 12 months contract basis. The Electrical Commissioning Technician positions come with a day rate from 400.00 to 450.00 outside of IR35. Role responsibilities and key skills for the role: Hands-on commissioning of electrical components and systems such as, transformers, medium/low voltage switchgears, DC systems, rectifiers, inverters, motorized valves, instruments etc. Fully competent at using Primary & Secondary Injection test set equipment. Assist the commissioning engineers in carrying out testing on electrical systems and equipment, as well as system optimization and troubleshooting and filling-in the respective commissioning documentation and protocols Participation in the walk-downs for Turnover from construction to commissioning, identifying open items that prevent system...

Overhaul Technician Location: Craigentinny Train Maintenance Centre, Edinburgh, EH8 7SY 12+ Month Initial Contract (Long Term Project) Standard Pay Rate: 28.82 /hour PAYE Equivalent to 38.27 /hour umbrella + Opportunity for overtime, Paid at Time and a Half (1.5%) This role falls inside IR35 - payment via PAYE or Umbrella Company Hours / Shifts: Shift Working. Combination of Days and Nights will be required, flexibility required depending on business needs. Please note that 1 Saturday Night as well as 1 Sunday Night will be required out of 4 Example Roster Pattern available upon request. Function of Role Undertake corrective and preventative maintenance, servicing and repair of Hitachi rolling stock assets Key Responsibilities Perform Scheduled Overhaul Maintenance activities on the rolling stock in accordance with the vehicle maintenance plan and required delivery schedule Undertake Modification...

Our Leicester cient is looking for 2 Technicians - Tape Testing & Metrology, to join them on a 6 month contract, due to an uplift in work. The roles do have the opportunity to go permanent following the initial timescales needed. Job Type: Full-time Department: Manufacturing / Engineering About the Role We are looking for a Technician - Tape Testing & Metrology to join our UK team and play a key role in the day-to-day testing, inspection and traceability of HTS tape materials. This is a hands-on technical role, responsible for operating tape testing and measurement equipment, carrying out incoming inspection of HTS reels, maintaining accurate test and traceability records, and supporting the Tape Insertion Manufacturing Engineer with production activities. The successful candidate will have a practical, methodical approach, strong attention to detail, and a commitment to quality and accurate data. Key Responsibilities Tape Testing & Metrology Operate...

Lead Technician Location: Etches Park Depot, Deadmans Road, Derby 6+ Month Initial Contract (With a view to extend) Pay: Standard Hours: 29.92 /hour PAYE 35.98 /hour Umbrella + Opportunity for overtime for hours beyond 40 per week, Paid at 1.25% Hours / Shifts : Combination of Days and nights. Standard shift Rate covers both days and nights. 4 off 4 on. 2 blocks of days 2 nights. 07:30 start time. 11 Hours /day (inc 1 hour unpaid break) Average 40 Standard Hours / Week + Overtime This role falls inside IR35 - payment via PAYE or Umbrella Company Function of Role To service, complex fault find and repair Hitachi rolling stock assets Key Responsibilities Maintain the condition of the work site, materials and equipment Adhere to health, safety, environmental & quality practices in the workplace Prepare for and undertake planned and unplanned maintenance activities Confirm that traction and rolling stock assets comply...

Job Title: Rolling Stock Technician Ref: CC(phone number removed) Location: Scotland (Various Options) Salary: Circa £35-40/hour (Umbrella) Shift: Days/Nights Options; Continental Shift Pattern; 35-40 hour week Role Type: Rolling Contract (Issued in 3 month blocks) Are you looking to join a team that is striving for more? This is a great opportunity to join a specialist team working to service rolling stock across Scotland. You will be part of a specially trained team that will tackle maintenance and address any faults that have occurred in service. This team and role is all about achieving a more efficient railway - with a focus on the customer you will help their fleets in service deliver safe, reliable services across Scotland & the UK. This is an exciting time to join a rail company that is pushing to improve customer experience through dedicated and detailed train maintenance activities, focusing on key elements of maintainability and improving day to day service...

Manufacturing Technician I Location: Cramlington Position Type: Full-time (12-Month Contract) Shift Pattern: Day shift ( 4 days on and 4 days off) rotation, 6:00 AM - 6:00 PM) Pay Rate: 13.46 per hour + 20% shift allowance Role Overview Safely and efficiently produce single-use medical products within a cGMP-compliant cleanroom environment, working to a defined schedule to meet customer orders. Key Responsibilities Follow detailed Standard Operating Procedures (SOPs), assembly drawings, and batch record sheets. Manually assemble critical components on the production line using manual, electronic, and pneumatic hand tools. Perform raw material setup and kitting. Inspect finished goods to ensure adherence to strict quality and customer specifications. Accurately record cGMP data within batch records. Maintain cleanroom 5S standards, safety practices, and correct PPE usage (including gowning). Requirements & Qualifications Previous...

Vehicle & Equipment Technician (Generator & Power Systems) Company: E-ppl Ltd Location: Banbury Pay Rate: £22.00 per hour Security Clearance: BPSS (Must be eligible to achieve) Contract Type: Contracting Ongoing Location: OX16 4SP About the role E-PPL is a leading provider of engineering, technical, and resource solutions across the automotive, power, and industrial sectors. We are seeking a skilled Vehicle & Equipment Technician specialising in generator repair and ground power support. In this role, you will perform essential preventative maintenance, fault diagnostics, and complex mechanical/electrical repairs on power generation units and heavy equipment to ensure maximum operational reliability for our clients. Key Responsibilities Diagnostics & Repair: Conduct fault identification, servicing, and full overhauls on diesel engines, auxiliary power units (APUs), and stationary or mobile generator systems. Electrical Systems Maintenance:...

Job Title: Manufacturing Technician - Night Shift (Cleanroom Assembly) Location: Cramlington (Unit 9 Atley Way) Pay Rate: 13.46 / hour + 30% Shift Allowance Contract: 12-Month Contract (1 Position Available) Shift Pattern: C-Shift - 4-on / 4-off Rotation (18:00 - 06:00, 12-hour NIGHT shifts) Hours: 40.25 hours/week average Suha here from Randstad! We are currently recruiting for a Night Shift Manufacturing Technician to join a global healthcare manufacturing facility in Cramlington. Working inside a cGMP-compliant cleanroom environment, you will play a key role in assembling, inspecting, and packaging single-use medical devices using hand tools and technical assembly drawings. Key Responsibilities: Assemble medical components inside a cleanroom following Standard Operating Procedures (SOPs) and assembly drawings. Use manual, electronic, and pneumatic hand tools to setup and kit raw materials on defined production lines. Perform continuous quality...

Soldering Technician Location: Burton upon Trent Pay Rate: £13.00 per hour Hours: 07:00 - 15:30 (flexibility available, including 08:00 - 16:30) Contract Length: Until Christmas Overtime: Available at Time & Ford & Stanley are pleased to be supporting our client based in Burton upon Trent in the recruitment of a Soldering Technician to join their growing production team. This is an excellent opportunity for candidates with soldering experience to secure a long-term contract running through to Christmas. While not guaranteed, there may be the potential for a permanent opportunity for the right candidate. The Role As a Soldering Technician, you will play a key role in the production process, carrying out high-quality soldering work on electronic components and assemblies. Working as part of a dedicated team, you'll ensure products meet customer specifications, quality standards, and production deadlines. Key Responsibilities Soldering electronic components and...

Rullion is currently looking foor candidates for the following role for one of our global leading Smart Infrastructure Clients: BMS Design Engineer Location: London ASAP Start 6 months rolling contract Outside IR35 (Apply online only) Per day 8 Hours per day 40 hours per week DBS Required Are you looking for an opportunity to join a growing business leading the way in shaping the future of BMS and Energy Management systems? Our client is looking for an experienced BMS design engineer to provide BMS system designs, and project engineering delivery strategies, for large BMS projects. The BMS design engineer should fully understand the engineering requirements of building control systems for a range of building types, varying in complexity. Candidates will need a thorough understanding of both mechanical and electrical building systems and be able to work autonomously. The role will require experience of interpreting customer specifications to develop comprehensive...

Site Manager 6 Months Monday - Friday (weekend working may be required dependent on project needs) Solihull Overview The Site Manager will be responsible for managing the safe delivery of HV electrical infrastructure and EV charging projects, from the construction stage through to commissioning, handover and final adoption. The role will act as the Principal Contractor under CDM 2015, taking responsibility for site activities, subcontractors, safety, quality, programme delivery and stakeholder management. This is a specialist HV Site Manager requirement rather than a general construction/retrofit Site Manager. The existing GFS profile covers general construction delivery, CDM, contractor management and programme responsibilities, but this requirement needs much stronger HV electrical experience. The existing profile, for example, focuses on PAS2030/PAS2035, MCS, Gas Safe and Building Regulations. Key Responsibilities Manage 11kV and 33kV HV...

Job Title: Asset Investment Manager Location: Remote Contract Type: 6 months contract Our client, a key player in the utilities sector, is seeking an enthusiastic and driven Asset Investment Manager to join their dynamic team. This exciting opportunity comes at a pivotal moment as the organisation leads the charge towards a fair energy transition, striving for net zero by 2050 while meeting the natural gas needs of today. About the Role: The Asset Investment Manager will play a crucial role in developing robust investment plans that support the organisation's strategic objectives. This position is integral to navigating the evolving energy landscape and ensuring that investment decisions are effectively communicated to both internal and external stakeholders. Key Accountabilities: Lead the development of robust Uncertainty Mechanism (UM) Engineering Justification documents, translating strategic objectives into actionable investment plans....