Location: Stamford & Nottingham Temp basis for 12 months We are seeking a hands-on Powertrain Test & Validation Engineer to support the development and validation of electric powertrain systems, focusing on Power Electronics (PE) and Motor/Generator (MG) technologies. The role acts as the key technical interface between the design engineering team and test facilities, ensuring accurate execution of validation activities, high-quality data capture, and effective root cause analysis of system issues. This position is highly practical, data-driven, and collaborative, requiring strong test execution capability combined with analytical problem-solving skills in an automotive electrification environment. Key Responsibilities Execute and manage daily powertrain test cell activities (setup, commissioning, execution, teardown) Develop and execute test procedures for validation of PE + MG systems Translate engineering requirements into structured test plans and validation...

Are you ready to bring your technical expertise to a world-leading stage? We are thrilled to partner with a large global manufacturer at the forefront of sustainable engineering to find a skilled Engine Test Technician. Based at their state-of-the-art Research & Development Centre in Peterborough, this is a chance to work within a culture of autonomy and excellence, helping to develop the next generation of power solutions. Location : Peterborough Contract : 12-month contract Pay Rate : 17.00 - 18.90 per hour Working Hours : 37 hours per week, Mon-Thu : 8:00 am - 4:30 pm Fri : 8:00 am - 1:00 pm Working within the Industrial Power Systems Division, you will support engineers in validating the performance and durability of engine components and systems. Your responsibilities will include: Operating test equipment and conducting investigations to obtain, analyse, and summarise critical data. Recording results through curves, charts, and sketches for...

Job Title: High Voltage Estimator Location: West Midlands and surrounding areas Start Date: ASAP Contract: 6 months (Possibility of a permanent position) Pay: 37,392 - 44,100 Hours: Monday to Friday 9 -5pm (Hybrid) Overview of the role - Team / Projects / Key challenges As the HV Estimator, you will have expert knowledge of the tendering process whilst being capable of dealing with a wide range of cost-planning activities. You will have the ability to perform detailed reviews of technical drawings and associated documentation and be responsible for both the creation and analysis of cost plans and risk profiling for a wide range of HV construction projects, including full measurement and detailed rating exercises. You will also be capable of easily visualising outline designs, drawings and specifications. Regular national travel. Flexibility required to suit the needs of the business. Projects will range from small one-off network connections to complex,...

My client are seeking a Machine Engineer or someone who has technical knowledge of machinery and feels comfortable around it with ideally a strong warehouse/manufacturing background. You will be operating 2 machines on a night shift and feel comfortable with Night work and have demonstrated that you have done it before. The role is temporary but commitment is required. It is a full time role Monday to Thursday - 11pm to 7am (1 x 15 minute paid break and 1 x 30 minute unpaid) and Friday 10.30pm to 6.30pm (1 x 15 min paid break and 1 30 minute unpaid). The training will be day shifts paid at the day rate of 12.71 for 4 weeks before moving to the Night Shift role. You will be presentable, have great written and spoken English and be able to communicate with ease and confidence. Available to start immediately subject to a successful interview. If you have an engineering background in mechanical or electrical engineering, or an engineering mindset please apply today! Please...

Sub Assembler £16.11 PAYE per hour rising to £17.04 after 13 weeks 6-month contract Burton upon Trent Days only with early Friday finish Hours: 07:00 to 16:00 Monday to Thursday 07:00 to 13:00 Friday The Role We are recruiting a Sub Assembler to join a busy Machine Shop within a well established rail engineering organisation based in Burton upon Trent. This hands on role involves the disassembly, reassembly and rebuilding of diesel engine sub assemblies, including compressors and water pumps, supporting the production of Cummins and MTU diesel engines to rail industry standards. You will work within a structured engineering environment, rotating across tasks and workstations to support production targets while maintaining safety, quality and housekeeping standards. Key Duties • Disassembly and reassembly of diesel engine components and sub assemblies • Rebuilding compressors, water pumps and other mechanical components • Rotating through multiple workstations...

ROLE : Bodyshop Technician LOCATION: Corby, Northampton Rate of pay £15.60 - £16.60 per hour depending on experience HOURS OF WORK: Monday to Friday 6am 3pm. Type of contract: Temporary ongoing HG Recruitment are recruiting Bodyshop Technician in partnership with our client based in Corby, Northamptonshire. This is a full-time temporary ongoing contract. Apply Now Join our team and start earning top rates. If you are an experienced Bodyshop Technician, APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail (url removed) JOB DESCRIPTION: Our client is currently looking for a Smart Repairer / who will be joining their busy body shop. Within this role, you will be working as a part of an experienced team in a state-of-the-art body shop, ensuring our vehicles are finished to the highest standard for our customers, under the support and guidance of the Bodyshop Supervisor. This opportunity is ideal...

Fabrication Welder Skelmersdale, Lancashire Apply Now Join our team and start earning top rates in Skelmersdale ( Walker Engineering ). If you are an experienced Fabrication Welder APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail url removed) ) RATES: £18 - £20 per hour (some flexibility of pay depending on experience). HG Recruitment are recruiting a Fabrication Welder in partnership with our client based in Skelmersdale, Lancashire. This is a 12-week temporary-to-permanent contract. We are seeking an experienced Fabricator Welder to join our client's team on a temporary to permanent, shop-based basis. This is an excellent opportunity for a skilled welder with strong fabrication experience to work on a variety of general steelwork and vessel projects. Working hours are: 7am 4.30pm , Monday to Thursday and Friday 7am 12pm. 30 mins unpaid lunch break. Overtime is paid after 42 hours at time and a half....

ROLE : Paint Technician LOCATION: Corby, Northamptonshire, NN17 5ZA RATE OF PAY: £16.71 - £19.65 per hour depending on experience HOURS OF WORK: Monday to Friday 6am 4pm. TYPE: Temporary ongoing HG Recruitment are recruiting Paint Technician in partnership with our client based in Corby, Northamptonshire. This is a full-time temporary ongoing contract. Apply Now Join our team and start earning top rates. If you are an experienced Paint Technician , APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail (url removed) Key Responsibilities: Paint preparation of the vehicle masking and prepping if required. Spray painting required vehicles using water-based paints. Checking paint colour and preparing spray out cards to ensure a perfect match. Cleaning up work area and making sure that equipment is working correctly. Supporting bodyshop team within other departments if required. Skills...

ROLE: PVC PIPE FITTER LOCATION: SKELMERSDALE, LANCASHIRE PAY RATE: £20 - £21 per hour (depending on experience), overtime rate is set at time and a half of standard pay rate, up to 10 hours overtime available per week HOURS OF WORK : 7am 4.30pm, Monday to Thursday and Friday 7am 12pm. 30 mins unpaid lunch break. Overtime is paid after 42 hours. HG Recruitment are recruiting a temporary PVC PIPE FITTER in partnership with our client based in SKELMERDALE, LANCASHIRE. Apply Now Join our team and start earning top rates. If you are an PVC PIPE FITTER - APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail (url removed) Estimated weekly pay based on 40 hours £840 Expected annual earnings £43,680 PCV Pipe Fitter responsible for the Assembly and Installation of pipework in the workshop and onsite. Our client is a well-established Engineering business based in Skelmersdale, specialising in the bespoke...

Service & Maintenance Engineer - Level 2 Are you a skilled engineer looking for a dynamic role in the rental energy sector? We are seeking a proactive Service & Maintenance Engineer (Level 2) to join our Power Rental team. You will play a key role in delivering high-quality electric power projects across the UK and Ireland. The Role As an Individual Contributor within our Operations department, you will ensure our rental equipment-including generators, load-banks, and transformer's in peak condition to support our diverse client base. Key Responsibilities: Maintenance & Inspection (20%): Inspect, service, and maintain rental equipment (generators, fuel tanks, load-banks, etc.) according to strict schedules. Site Leadership (20%): Lead site installations, commissioning, and decommissioning of rental solutions, including the synchronisation of multiple generators. Technical Support (25%): Perform in-depth repairs and troubleshoot complex technical...

Job title : Materials Technician Job Type: Contract IR35 Status: Inside Start date: Immediate Duration: Up to Dec 2026 (Extension possible beyond this) Pay rate: Up to 18.93 per hour PAYE & Umbrella rates available Location: Hartlepool Hours of work: Monday - Friday Our client, a leader in Nuclear Generation requires a Materials Technician. The role involves managing goods receipt, stock control, and material issuing within a highly regulated environment, ensuring all items meet strict quality, safety, and compliance standards. The successful candidate will play a key role in maintaining an efficient and controlled supply chain, working closely with internal teams and suppliers to support site operations. Applicants should be able to demonstrate of the following skills/experience: Experience working in a Parts Warehouse/ Logistics environment is essential. An ability to interpret and interrogate product datasheets and certification as well as...

Facilities Project Engineer Location: Stafford (On-site) Pay Rate: Up to 22.00 per hour Contract Length: 6 Months (Full-Time) Shift: Monday - Thursday, 06:45 am - 04:30 pm (Flexibility for overtime required) The Role Are you a proactive Engineer with a background in construction or infrastructure? We are looking for a Facilities Project Engineer to join our team in Stafford. You will own and manage a variety of facility improvement projects, focusing on site infrastructure, machinery, and health and safety upgrades. This is a dynamic role where you will be responsible for taking projects from initial scope through to final handover, ensuring every milestone is met with precision and a safety-first mindset. Key Responsibilities Project Delivery: Lead building and systems projects, ensuring they are completed on time, within budget, and to high-quality standards. Safety & Compliance: Develop and review project documentation, including scopes, technical drawings,...

Mechanical Fitter Required Job Title: Production Support Technician Location: Derby Shift Pattern: Monday to Friday 08 30 Contract Type: Contract with potential for permanent for the right person Role Overview We are currently recruiting a Production Support Technician with hands on Mechanical Fitter experience to join our manufacturing team, supporting the assembly and fitting of front-end and inter-car gangways of rail vehicles. This is a hands-on, factory-based role requiring strong mechanical aptitude and the ability to work effectively as part of a team. Key Responsibilities Assembly of front-end and inter-car gangways off train in a factory environment Bench-based mechanical assembly and fitting work Confident use of hand tools and power tools to complete assemblies Reading and following basic engineering drawings and work instructions Working collaboratively as part of a production team Essential Skills & Experience Previous...