Plumber - Walsgrave - NHS site. Immediate start - c 20 per hour. 6 months work Defect work in a live hospital replacing flexi pipe with copper pipe by sinks and basins and replacing Girpi pipework. Must have at least C&G level 2 in plumbing and Blue or Gold skill card. Apply online Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.

Climate Resilience Specialist (Early Warning Systems) Join a global organisation delivering climate resilience, early warning systems (EWS) and disaster risk reduction programmes, driving innovation, research and partnerships to support vulnerable communities worldwide. If you’ve also worked in the following roles, we’d also like to hear from you: Climate Adaptation Specialist, Resilience Programme Manager, Disaster Risk Reduction Advisor, Environmental Consultant   SALARY: £42,600 - £50,000 pro rata (depending on experience LOCATION: Hybrid working – you will be expected to attend the office in Rugby, Warwickshire, West Midlands on regular occasions JOB TYPE: Full-Time, Fixed-Term Temporary Contact (until December 2027)   JOB OVERVIEW We have a fantastic new job opportunity for a Climate Resilience Specialist (Early Warning Systems) to support global climate resilience and disaster risk reduction programmes, with a...

Plumber in Birmingham required for long term temporary contract in Selly Oak. 20 per hour PAYE Long term temp cover for a tap replacement project starting in April. Will be required to cover off the below: Assessment & planning Infection-control compliance Safe isolation Tap removal & installation TMV checks Water hygiene flushing Documentation & handover Previous experience of working within a health care environment (desirable) NVQ or C&G Level 2 Heating/Vent/Plumbing Legionella/TMV/Disinfection awareness and training EUSR (Blue) Water Hygiene Card and ideally Legionella Awareness Training Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.

Job Title: CNC Turner Location: Leicestershire, LE10 Shift: Rotating Monday - Friday, 6am - 2pm and Monday - Friday, 2pm - 10pm Pay Rate: 20.21 per hour Benefits: Permanent position Career progression, Company pension Staff events Excellent facilities Free onsite parking The Company: A well-established East Midlands business with an enviable reputation, providing engineering solutions through the design and manufacture of products. This is a great opportunity for a CNC Turner. The CNC Turner Role: We're looking for an experienced and detail-oriented CNC Turner to join a dynamic and inclusive manufacturing team. In this role, you will set, operate, and oversee CNC turning machines to produce high-quality precision components for a variety of industries. If you enjoy working in a collaborative and innovative environment, apply today to be part of an organization that values diversity, continuous improvement, and employee growth. Key...

Engineer required CNC Turner LOCATION: Worcester, Worcestershire (WR5) Apply Now Join our team and start earning top rates in Worcester . If you are an experienced CNC Turner, APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail (url removed) RATES: £17 50 per hour Some flexibility of pay depending on experience. HG Recruitment are recruiting a CNC Turner (Mazak) controls, in partnership with our client based in Worcester, Worcestershire. This is a full time permanent contract. We are seeking an experienced CNC Turner to join our clients team on a permanent, shop-based basis. This is an excellent opportunity for a CNC Turner with the ability to programme on Mazak controls is ESSENTIAL. You will be working on a wide variety projects ranging from automotive and aerospace to medical and manufacturing. Working hours are: Flexible working hours Monday to Friday (flexible starts between 6am 8am start, 6am 2pm or 7am...

Position: Panel Wirer Salary: 20.00 - 22.00 - Negotiable Location: Walsall Hours: Monday to Thursday 07:00am - 17:30pm - 40+ hours per week - OT Available (Early start available) Proactive are currently recruiting for multiple experienced Panel Wirers to begin work for a leading engineering company based in Walsall. The correct candidate ideally should be multi skilled capable and adaptable, be self-organised and personable, with an eye for detail and good initiative. Principle Duties include: Control Panel Build and Panel Wiring Control panel & equipment build, cable installation & containment, wiring of sensors. Fitting / Assembly Including completion of build records. Abilty to read electrical wiring diagrams and schematics. Experience and qualifications required: Good standard of education Experienced with hand tools and power tools. Working to CAD electrical drawings, following BOM's. Adhering to strict quality standards. IT...

The basics: Job Title: Quality Inspector Industry: Precision Engineering Location: Evesham Shift: Late Shift - Monday-Wednesday (4.30pm to 2.30am) and Thursdays (4.30pm to 1.30am) Pay: Starting at 16.89 - 17.53 per hour - DOE with rates up to 19.45 available Contracted hours per week: 39hrs Overtime available at x1.33 Mon-Fri, x1.5 Saturday and x2 Sunday Holidays/Benefits: Holidays are calculated in hours but work out to be 5.6 weeks of annual leave per year inc. bank holidays, increasing to 6.6 weeks inc. bank holidays following 1 year of continuous service. Death in Service Benefit - 2 x annual salary. Employer 3% / Employee 5% - Pension. Overview: We now require a Quality Inspector to join the team. You will be tasked to visually inspect metal components with some dimensional checks also required, using hand tools such as verniers, callipers, depth/height gauges. Key responsibilities of the Quality Inspector role: Visually and dimensionally inspect metal...

Service & Maintenance Engineer - Level 2 Are you a skilled engineer looking for a dynamic role in the rental energy sector? We are seeking a proactive Service & Maintenance Engineer (Level 2) to join our Power Rental team. You will play a key role in delivering high-quality electric power projects across the UK and Ireland. The Role As an Individual Contributor within our Operations department, you will ensure our rental equipment-including generators, load-banks, and transformer's in peak condition to support our diverse client base. Key Responsibilities: Maintenance & Inspection (20%): Inspect, service, and maintain rental equipment (generators, fuel tanks, load-banks, etc.) according to strict schedules. Site Leadership (20%): Lead site installations, commissioning, and decommissioning of rental solutions, including the synchronisation of multiple generators. Technical Support (25%): Perform in-depth repairs and troubleshoot complex technical...

Job Title: MIG Welder Location: Burton-on-Trent & Swadlincote, Staffordshire Job Type: Permanent Start Date: ASAP We are currently recruiting experienced MIG Welders to work on heavy industrial machinery, including crushers and shredders. This role involves high-quality welding in a fabrication and repair environment, working with thick materials and heavy-duty components. Permanent positions are available in both Burton-on-Trent and Swadlincote. Pay Rates Days: 17 per hour (PAYE) Nights: 21 per hour (PAYE) Overtime: o Weekdays & Saturdays - x1.5 o Sundays - x2 Working Hours Day Shift: 07:00 - 17:00 (45 hours per week) Night Shift: Flexible shift times available Flexibility with start and finish times for both shifts Key Duties & Responsibilities: MIG welding on heavy machinery such as crushers and shredders. Fabrication, repair, and refurbishment of large industrial components. Reading and working from engineering drawings. Welding thick...

Engine Builder Rail Industry Location: Burton-on-Trent Contract: 6 month contract Hours of Work: Monday to Thursday: 7:00am 4:00pm Friday: 7:00am 1:00pm About the Role We are currently recruiting Engine Builders to support rail industry operations based in Burton-on-Trent . This is an excellent opportunity to work within a high-quality engineering environment, carrying out the strip-down, rebuild and assembly of rail engine components, while maintaining strict safety and quality standards. You will join a supportive and skilled engineering team, committed to excellence, continuous improvement, and safe working practices within the rail sector. Key Responsibilities As an Engine Builder, your duties will include: Stripping and rebuilding mechanical engine components in line with work instructions Working accurately to OEM manuals and technical documentation Reading and interpreting assembly specifications to plan and complete build activities Verifying...

NDT Tester NDT Technician Non Destructive Testing TXM Recruit are looking for a NDT (MPI) Technician on an initial contract basis to work for an engineering company in Doncaster then move to Burton. The standard rate for this role is 26.06ph Umb/ 19.20 PAYE (inside IR35) with overtime enhancements after 37 hrs. The role is expected to be Monday to Friday days predominantly with some Afternoons (paid at a 20% uplift), 37 hours per week with occasional overtime. This will be a 9/10 month training at Doncaster with Mileage paid for travel to this depot (30p per mile) , the role will then move to a new facility being built in Barton under Needwood (Burton upon Trent, DE13 area) where there will be the opportunity to go permanent after a short while. Position Summary: To carry out Non Destructive Testing (MPI) work on Rolling Stock assets and related components Person Profile/Experience: PCN Level 1 qualified as a minimum Any background can be considered as a...

Job Title: Assembly Fitter Location: Loughborough, Leicestershire Duration: Ongoing Contract (6 months temp to perm) Shifts: Days We are currently recruiting for experienced Assembly Fitters for temporary to permanent positions in Loughborough. Working within a team of Erectors to produce Transformer Internal Assemblies to Engineering specifications. This involves reading and understanding engineering drawings, working to Quality Stage Charts, fitting, crimping, and some minor electrical testing. Key Responsibilities: Building of core & coils for 33kV, 66kV, and 132kv power transformers within the Transformer Assembly section. Transposing taps on 33kV, 66kV, and 132kv power transformer coil windings. Preparing, crimping & connecting, and routing of cables in adherence to defined critical clearance tolerances. Conduct pre-tank parallel and ratio checks to electrical specifications. Standing/upending, plating up & oven processing/pressing of all coil...

ROLE : Bodyshop Technician LOCATION: Corby, Northampton Rate of pay £15.60 - £16.60 per hour depending on experience HOURS OF WORK: Monday to Friday 6am 3pm. Type of contract: Temporary ongoing HG Recruitment are recruiting Bodyshop Technician in partnership with our client based in Corby, Northamptonshire. This is a full-time temporary ongoing contract. Apply Now Join our team and start earning top rates. If you are an experienced Bodyshop Technician, APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail (url removed) JOB DESCRIPTION: Our client is currently looking for a Smart Repairer / who will be joining their busy body shop. Within this role, you will be working as a part of an experienced team in a state-of-the-art body shop, ensuring our vehicles are finished to the highest standard for our customers, under the support and guidance of the Bodyshop Supervisor. This opportunity is ideal...

ROLE : Paint Technician LOCATION: Corby, Northamptonshire, NN17 5ZA RATE OF PAY: £16.71 - £19.65 per hour depending on experience HOURS OF WORK: Monday to Friday 6am 4pm. TYPE: Temporary ongoing HG Recruitment are recruiting Paint Technician in partnership with our client based in Corby, Northamptonshire. This is a full-time temporary ongoing contract. Apply Now Join our team and start earning top rates. If you are an experienced Paint Technician , APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail (url removed) Key Responsibilities: Paint preparation of the vehicle masking and prepping if required. Spray painting required vehicles using water-based paints. Checking paint colour and preparing spray out cards to ensure a perfect match. Cleaning up work area and making sure that equipment is working correctly. Supporting bodyshop team within other departments if required. Skills...

Sub Assembler £16.11 PAYE per hour rising to £17.04 after 13 weeks 6-month contract Burton upon Trent Days only with early Friday finish Hours: 07:00 to 16:00 Monday to Thursday 07:00 to 13:00 Friday The Role We are recruiting a Sub Assembler to join a busy Machine Shop within a well established rail engineering organisation based in Burton upon Trent. This hands on role involves the disassembly, reassembly and rebuilding of diesel engine sub assemblies, including compressors and water pumps, supporting the production of Cummins and MTU diesel engines to rail industry standards. You will work within a structured engineering environment, rotating across tasks and workstations to support production targets while maintaining safety, quality and housekeeping standards. Key Duties • Disassembly and reassembly of diesel engine components and sub assemblies • Rebuilding compressors, water pumps and other mechanical components • Rotating through multiple workstations...

Facilities Project Engineer Location: Stafford (On-site) Pay Rate: Up to 22.00 per hour Contract Length: 6 Months (Full-Time) Shift: Monday - Thursday, 06:45 am - 04:30 pm (Flexibility for overtime required) The Role Are you a proactive Engineer with a background in construction or infrastructure? We are looking for a Facilities Project Engineer to join our team in Stafford. You will own and manage a variety of facility improvement projects, focusing on site infrastructure, machinery, and health and safety upgrades. This is a dynamic role where you will be responsible for taking projects from initial scope through to final handover, ensuring every milestone is met with precision and a safety-first mindset. Key Responsibilities Project Delivery: Lead building and systems projects, ensuring they are completed on time, within budget, and to high-quality standards. Safety & Compliance: Develop and review project documentation, including scopes, technical drawings,...

Mechanical Fitter Required Job Title: Production Support Technician Location: Derby Shift Pattern: Monday to Friday 08 30 Contract Type: Contract with potential for permanent for the right person Role Overview We are currently recruiting a Production Support Technician with hands on Mechanical Fitter experience to join our manufacturing team, supporting the assembly and fitting of front-end and inter-car gangways of rail vehicles. This is a hands-on, factory-based role requiring strong mechanical aptitude and the ability to work effectively as part of a team. Key Responsibilities Assembly of front-end and inter-car gangways off train in a factory environment Bench-based mechanical assembly and fitting work Confident use of hand tools and power tools to complete assemblies Reading and following basic engineering drawings and work instructions Working collaboratively as part of a production team Essential Skills & Experience Previous...

Machinist / Miller / Turner / CNC Engineer Skilled CNC Engineer / Machinist required to manufacture precision components using milling and turning techniques within a specialist engineering and manufacturing environment. If you’ve also worked in the following roles, we’d also like to hear from you: CNC Machinist, Precision Engineer, Manufacturing Engineer, Toolmaker, CNC Miller, CNC Turner   SALARY: up to £35,000 per annum pro rata (subject to experience) LOCATION: Ashton Keynes, Swindon, Wiltshire (SN6) - Travelling to the site will always be against the traffic JOB TYPE: Full-Time OR Part-Time, Permanent – NO Shifts FULL-TIME WORKING HOURS: Monday to Thursday 8.00am - 17.00pm, Fridays till 2pm PART-TIME WORKING HOURS: 3 Days per Week   JOB OVERVIEW We have a fantastic new job opportunity for a Machinist / Miller / Turner / CNC Engineer with experience in precision machining, CNC milling and...

Our prestigous client from the automotive industry are looking for a Mechincal Inspector to join their site in Thurleigh near Bedford : Job Role: Carry out mechanical inspections Carry out the vehicle Pre-Delivery Inspection to manufacturer specification. Record the completion of the PDI and update fleet systems. Ensure vehicles are completed ready for delivery at the pre-determined date. To accessorize vehicles as and when required. Experience: Clean driving licence is essential. Previous mechanical experience. Able to provide excellent customer service at all times. To be able to work as part of a team. Have a friendly, can do attitude. Please contact Adam on (phone number removed) to find out more! INDENG Planet Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Planet Recruitment is an Equal Opportunities Employer. By applying for this role your details will be...

CNC Miller / CNC Programmer Setter Operator Location: Nottingham / Derby area Salary: £17.00 - £18.00 per hour Hours: 40 hours per week Employment: Permanent Experienced CNC Miller required to program, set and operate XYZ (Prototrak controls) or 3axis CNC Mills , producing precision components within a well-established engineering company offering an early finish every Friday. Benefits Early finish every Friday Overtime opportunities available Stable and growing precision engineering company Modern CNC machining environment Training opportunities including 5-axis machining and automation Supportive team culture with experienced machinists Free onsite parking CNC Miller - Role Overview A well-established precision engineering subcontract manufacturer is looking to recruit a CNC Miller / CNC Programmer Setter Operator to join their busy CNC machining team. The role involves programming, setting and operating CNC milling machines , primarily XYZ CNC...