Paint Sprayer / Vehicle Paint Technician - Rolling Stock Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern Location: Derby Shifts: Days Minimum 45 hours per week Immediate starts available Key Responsibilities Carry out full surface preparation on rolling stock (sanding, keying, masking, filling) Apply primer and topcoat systems, including 2K paint...

MIG Welder 18 - 20 per hour Day shift Derby The Role We are seeking a skilled Welder. You will carry out welding to high standards, working on components and assemblies in mild and stainless steel. A weld test will be required during the interview process. Key Responsibilities Perform welding tasks to specification in both mild steel and stainless steel Read and interpret engineering drawings Prepare, fit, and align parts prior to welding Carry out quality checks on your work Work as part of a team to meet production goals fabrication work Requirements / Skills Proven competence in welding mild and stainless steel Experience with MIG, or equivalent welding methods Ability to pass a weld test as part of the hiring process Good attention to detail and commitment to quality Able to work within a team and take responsibility for your work Flexibility to work on rotating shifts If you are interested in this role please forward your CV Proactive...

Mechanical Technician Overhaul Technician Rolling Stock Heavy Technician Looking for a new role? Dont want to work Nights? We are looking for an experienced MechanicalTechnicians to carry out Heavy maintenance on a fleet of vehicles in Derby on a 18 month Contract basis. This role has a rate of 19.59 ph PAYE or 26.59 Umb - 40 hours a week, Monday to Friday Days only with potential overtime The individuals must have experience in some form of Maintenance or overhaul of Rolling stock or Heavy equipment/Vehicles such as Diggers, Plant, Tractors, HGVs, Armoured/Tracked vehicles etc Your Tasks Carry out maintenance and overhaul of Rail Vehicles to laid down standards and procedures Working on the underframes of rail vehicles to refit/replace components as part of the overhaul. Your Profile Essential: Experienced engineer, qualified to NVQ Level 3. Proven experience of either involvement and understanding of rail vehicle heavy maintenance activities such as...

Fabricator Welder Location: Burton-on-Trent Pay: 15.00- 17.00 per hour Start: Immediate Shift: Day shift Contract: Temp to Perm A well-established manufacturing business in Burton-on-Trent is looking for an experienced Fabricator Welder to join the team on a temp-to-perm basis. You'll be involved in the fabrication and MIG welding of bespoke metal and architectural components, working from detailed drawings and producing high-quality finished parts. Key Responsibilities Fabricate and weld metal structures from scratch Carry out MIG welding (TIG experience advantageous) Read and interpret complex engineering drawings Work with a range of materials, primarily mild steel Operate workshop machinery including guillotines, press brakes, rollers and grinders Measure, cut and assemble components to tight tolerances Inspect finished work to ensure quality and compliance with specifications Experience Required Proven fabrication and welding experience within a...

Job Title: Mechanical Fitter (Raft Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: 17- 18.79 plus shift allowance. Late shift: Monday - Thursday 14.30pm to 01.00am ( after completing 4 weeks training on days 7am till 4pm Monday to Thursday and 7am till 1pm on a Friday) Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters for an ongoing contract. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters with Hydraulic experience Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. To be able to fault find and carry out diagnostic investigation work. Previous engine knowledge would be advantageous. To overhaul of raft components. To be able to understand schematic drawings. To undertake training as and when required. To...

Quality Inspector Nottingham Up to 18.00 per hour Permanent Full-Time Day Shift We're partnering with a well-established engineering business with an excellent reputation for quality and safety. They're now looking for a proactive Quality Inspector to support production and ensure products consistently meet ISO 9001 and customer standards. Key responsibilities Carry out inspections throughout the full production process to confirm compliance with ISO 9001 and customer requirements Inspect components and assemblies using CMM equipment Complete internal audits, support COSHH assessments, and coordinate external assessments/visits Own quality documentation, ensuring all records are accurate, complete and up to date Support production with quality issues, complaints and day-to-day problem solving Maintain the calibration system and manage non-conformance reporting and controls What we're looking for Previous experience in a Quality Inspector role within an...

CNC Miller Nottingham Up to 17.00ph Day Shifts Permanent Position CNC Milling Machinists requited immediately for our precision engineering client based in Nottingham. The role will involve either programming or setting and operating a variety of CNC Milling machinery. Duties: Programming or setting and operating milling machines (online) Using different control systems including Fanuc, Siemens and Heidenheim Maintaining high quality standards such as ISO 9001 Reading and interpreting technical drawings and job cards Producing bespoke components that are made to order Selecting appropriate tooling and fixtures for specific jobs Person Specification: CNC Milling experience is essential Programming experience would be preferred, however strong setting and operating experience would be accepted Worked with a wide variety of materials including aluminium, stainless steel and mild steel Ability to work from technical drawings and use...

Quality Inspector Nottingham Up to 18.00ph Permanent, Full-Time Day Shift We are proud to be partnering with a well-established engineering company renowned for its commitment to quality and safety. Our client is seeking a highly capable and motivated Quality Inspector to support their operations. Your Key Responsibilities: Performing inspections at every stage of production, ensuring compliance with ISO:9001 and customer requirements Inspecting parts and assemblies using CMM machines Conducting internal audits, COSHH assessments, and coordinating external evaluations Taking ownership of quality documentation and completing all necessary records Supporting the production team with complains and any issues that arise Maintaining calibration systems and overseeing non-conformance handling The Ideal Candidate Will Have: Strong background within a Quality Inspector role Proficiency in interpreting mechanical drawings and using a wide...

Job Title : Profiler Location : Nottingham Pay : 21.00 per hour Hours : Saturday & Sunday nights (weekend nights only) Gi Pro are working with a well-established steel fabrication business in Nottingham who are looking to add an experienced Profiler to their weekend night shift. Key Responsibilities: Operate profiling machinery (e.g. plasma/Oxy-fuel) to cut steel plate to specification Interpret engineering drawings, cutting lists and work instructions Set up, calibrate and adjust machines to achieve accurate cuts and high-quality finishes Carry out basic maintenance and pre-use checks on machinery Monitor production quality and make adjustments to optimise output and minimise waste Work closely with production, welding and fabrication teams to meet schedules Complete all relevant paperwork and data entry as required Adhere to all health & safety, quality and housekeeping standards Requirements: Proven experience as a Profiler / Profiling Machine...

Fabricator / Welder Nottingham 13.00 - 23.00ph Immediate Start Day & Night Shift Available! We are seeking multiple Fabricator Welders to join our well established manufacturing client in Nottingham. You'll be instrumental in the fabrication and welding of bespoke metal components, contributing to high-quality engineering projects across a range of sectors. Key Responsibilities: Fabricate metal structures and components from scratch Using MIG welding techniques on gauges up to 100mm Read and interpret complex engineering drawings and technical specifications Operate fabrication equipment such as guillotines, press brakes, rollers, and grinders Measure, cut, and assemble steel and other metals to exact tolerances Inspect finished products for quality assurance and compliance with specifications Qualifications & Experience: Proven experience in fabricating and welding within an engineering or manufacturing environment Welding certificates or...

Mechanical Fitters Derby 13.00 - 17.00 per hour + overtime 42 hours per week Mon-Fri, 07:30-16:30 We're recruiting 2-3 Mechanical Fitters for a well-established engineering business within the rail sector. Due to continued growth and increased workload, they're looking to strengthen their skilled team. The role This is a practical, hands-on position working on a variety of mechanical systems and components, primarily rail-related. The role is mainly workshop-based with occasional site work. Key responsibilities: Installation, assembly and alignment of mechanical components and equipment Maintenance and repair of rail systems, including work on damaged rolling stock Fault finding and completing corrective repairs Working with pumps, gearboxes, conveyors, valves and rotating equipment Reading and interpreting engineering drawings and technical documentation Completing job reports and maintenance records accurately Working to health & safety procedures...

Are you mechanically inclined and have an interest in engineering? Do you have any previous experience in a role that involves basic mechanical skills working with nuts, bolts and general tools? If so, then please read on. The basics: Job Title: Mechanical Assembly Fitter Industry: Manufacturing Hours: Monday to Thursday 6am to 2:30pm and Fridays 6am to 11am Role: Permanent Pay Rates: Dependent on experience Level 1: 15.83, Level 2: 16.15, Level 3: 16.46 Level 4: 16.76, Level 5: 17.07, Level 6: 18.31 Starting pay usually 16.46 per hour x 37hr week = 31669 per annum + Overtime = Earnings of 37000 achievable. Hourly rates increase with skill set via the companies skills matrix. Overtime rates: 1.5 Mon-Sat and Double time on Sundays. Location: Near to Coalville Benefits - 33 days holiday, free onsite parking, onsite canteen, pension 5% paid by employer, life insurance x3 of salary , childcare vouchers. Overview: Working for a large manufacturing business that...

The advertised pay rate applies to any hours worked between 10pm and 4am. Please Note: This role will be based in in our Sawley Regional Distribution centre in the first instance with a move to our Bardon site in 2026. Please consider this action before completing your application. Bardon is Aldi's first globally automated site with the facilities and MHE maintenance Team pivotal to the plant's success. Aldi require Maintenance Technicians who will be empowered to shape Aldi's future and tackle some of the toughest technical and logistical challenges around. We need your technical skills, innovative approach, and experience to help us continue to transform our business whilst maintaining a cost leadership model. A key element of the role will be to embrace Aldi's culture and values of simplicity, responsibility and consistency. To underpin the Aldi culture and values, you will engage and develop your knowledge and initiative following the principles of the ALDI Management...

Job Title: Mechanical Fitter Location: Loughborough, Leicestershire Duration: Ongoing Contract (6+ months temp to perm) Shifts: Days, 7am- 4pm Mon to Thurs, 7am -1pm Fri Rates: 18.57 (PAYE) or 24.48 Umbrella( whilst temping) We are currently recruiting for a Mechanical Fitter to build transformer assemblies for ongoing contracts based in Loughborough, Leicestershire. This involves reading and understanding engineering drawings, working to process control plans, fitting, crimping, and some minor electrical testing. Key Duties & Responsibilities: Building of core & coils within the Transformer Assembly section. Transposing taps on coil windings. Preparing, crimping & connecting, and routing of cables. Parallel and pre-tank ratio checks. Standing/upending, plating up & processing of all coil windings. Movement of materials & parts between areas, including oven process. Maintain high level of cleanliness and housekeeping throughout the Production facility....

Job Title: Assembly Fitter Location: Loughborough, Leicestershire Duration: Ongoing Contract (6+ months temp to perm) Shifts: Days, 7am- 4pm Mon to Thurs, 7am -1pm Fri Rates: 18.57 (PAYE) or 24.48 Umbrella( whilst temping) We are currently recruiting for an Assembly Fitter to build transformer assemblies for ongoing contracts based in Loughborough, Leicestershire. This involves reading and understanding engineering drawings, working to process control plans, fitting, crimping, and some minor electrical testing. Key Duties & Responsibilities: Building of core & coils within the Transformer Assembly section. Transposing taps on coil windings. Preparing, crimping & connecting, and routing of cables. Parallel and pre-tank ratio checks. Standing/upending, plating up & processing of all coil windings. Movement of materials & parts between areas, including oven process. Maintain high level of cleanliness and housekeeping throughout the Production facility....

Job Title: FLT Driver / Production Serviceman Location: Loughborough, Leicestershire Duration: Temp to Perm Shifts: Days We are currently recruiting for a Production Serviceman that holds a valid FLT Licence for an ongoing contract based in Loughborough. To ensure continuity of production materials and general housekeeping duties within all areas. You will provide indirect labour to transformer production winding, transformer assembly, final assembly and internal transport of consumable materials and transformer parts. Key Duties & Responsibilities: Maintain and improve level of cleanliness and housekeeping throughout the Production facility. Movement of materials & parts between areas, including oven process. Operation of overhead cranes, ride on pallet truck, and fork-lift truck. Shifts: Mornings - 07:00 to 16:00 Monday to Thursday, 07:00 to 13:00 Friday Pay Rates: Basic - 15.50 PAYE, 20.52 UMB ( whilst temping) Over time rates available...

Job Title: Yard Operative / Shunter (Rail) Location: Charnwood / Loughborough Area Salary: £18.00 PAYE / £23.49 Umbrella per hour (Days) £23.94 PAYE per hour / £31.17 Umbrella (Nights) 57.5 hour working week on average. Circa £55-60kpa (shift dependant). Role Type: 3-Month Rolling Contract; Monday Friday (Days / Nights) Are you a hard-working, hands-on individual looking for a physically active role in a fast-paced industrial environment? This is a great opportunity to join a large-scale operation within the Rail sector, supporting yard logistics and site movements. We re looking for Yard Operatives / Shunters to join a busy site in the East Midlands. The ideal candidate will have some rail experience or familiarity working in a similar safety critical environment. It s an excellent opportunity for individuals from track side labouring, yard operative, depot shunting or similar backgrounds. We would also welcome applicants transitioning from other highly...

Press Brake Operative Leicester Rate: £15 £18 p/h + £1.70 shift premium Contract: 13-week temp to perm Hours: Mon Thurs 3:15pm 1:15am (Back Shift) We re seeking an experienced Press Brake Operative to work on large-scale machinery in a busy manufacturing environment. The Role: Operating 3m and 6m press brake machines Bending large sheet metal components Working from engineering drawings Supporting production targets and quality standards Potential to step into a supervisory capacity Requirements: Proven press brake experience Ability to read engineering drawings Experience with large machinery Strong work ethic and reliability What s on Offer: Higher earning potential with shift premium Overtime available Long-term opportunity with progression Apply now to secure your place. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of...

Semi-Skilled Electrical Fitter Location: Nottinghamshire Contract: Temporary to Permanent Pay: Up to 16.50 per hour (DOE) A well-established company in Nottinghamshire is looking for a Semi-Skilled Electrical Fitter to join the team on a temp-to-perm basis. If you have any electrical experience, knowledge, or qualifications, this is a great opportunity to build your skills with full training and long-term progression. The Role Assemble a variety of electrical components and units Complete wiring tasks including crimping and cable preparation Test units to ensure they meet relevant electrical standards Identify, diagnose, and report faults during the build process Work with low and medium-voltage components Use hand tools, power tools, and electrical test equipment safely and confidently What We're Looking For Previous electrical experience or relevant electrical qualifications Basic understanding of electrical diagrams and schematics Confident using a...

Mechanical Fitter / Tram Maintainer - Rolling Stock (Contract Role) Location: Nottingham Tram Depot, Wilkinson Street, Nottingham Duration: Ongoing Contract Start Date: ASAP Shift Pattern: Days Only - 4 on 4 off - 07:00 / 19:00 About the Opportunity: Rullion is working with a prestigious Rolling Stock and Light Rail client to recruit Mechanical Fitters on a contract position at their Nottingham Tram Depot. This is a fantastic opportunity for skilled professionals with an NVQ Level 3 (or equivalent) in Mechanical Engineering to contribute to the reliability and maintenance of a modern light rail fleet. Pay Rates (Inside IR35): PAYE: 20.61/hour + accrued holiday Umbrella: 26.27/hour (first 12 weeks) 27.56/hour (after 12 weeks) Role Overview: As a member of the depot's autonomous maintenance team, you will provide mechanical expertise to support our client's maintenance and service commitments for their tram fleet. Key...